PB6W Roofing Cover Board
Mechanically-fastened and ballasted EPDM, TPO and PVC single-ply roof membranes.
PB6W is an excellent choice for re-roofing with mechanically attached single-ply membranes. The board’s high compressive strength helps to create a smooth surface, even over most gravel surfaced roofs. And the extruded polystyrene (XPS) foam core provides high moisture resistance. PB6W can be used under mechanically attached or loose-laid and ballasted single-ply applications. It is both UL and FM approved. The 50′ fanfold bundles are easy to install and lightweight, adding only 1/10 lb. per sq. ft. With 3 lb. density foam and 3-ply facers that do not delaminate, PB6W delivers solid installed performance.
|TYPICAL PHYSICAL PROPERTIES|
|Property||Test Method||PB6W||PB6 PLUS|
Thermal Resistance, R-Value¹
| ASTM C 518
(psi @ 10% Deflection)
|ASTM D 1621||15||20|
(Max.% by Volume)
|ASTM C 272||0.6||0.6|
Water Vapor Permeance
| ASTM E 96
|ASTM E 84/UL 723||
Use Temp (ºF)
|DIMENSIONS / PACKAGING|
|Bundle Dimensions||4' x 50'||4' x 50'|
1 Specimens were aged and tested in accordance with FTC Rule (16 CFR, Part 460).
2 These numerical flame spread and smoke ratings are not intended to reflect hazards presented by this material under actual fire conditions. See UL Classification Certificate A184.
- PB6W Product Sheet
- Siding Underlayment, Sheathing & Roofing Cover Board-SDS
- PB6 Roofing Cover Board Thermal Warranty
- Code Report - Fanfold and Insulating Sheathing
- Roofing Cover Board Installation Guide
- PB6 Plus Product Sheet
- Florida Product Approval - No. FL14164
- Roofing Cover Board-Contribution to LEED Credits